No-drill sliding window lock

Sliding Window Lock

A second lock for the windows that only have one.

$14.99One-time · free tracked shipping
  • Locks sliding windows and doorsFully shut, or at a vented gap you choose for air.
  • Stops the lift-and-slide trickHolds the panel down in its track, not just sideways.
  • Tool-free fitClamps to the track in seconds, no drilling.
  • Works with the factory latchTwo locks on a window are far harder than one.
Free tracked shipping 30-day returns Tested before shipping
Sliding Window Lock $14.99

The weakest lock you own

The flimsiest lock in your home is on a window.

The little latch that came on your sliding window was built to keep it from drifting open, not to stop someone determined. Many sliding panels can even be lifted clear of the track from outside without touching the latch at all.

A dedicated track lock fixes both problems. It clamps to the track so the panel cannot slide and cannot be lifted free, and you can set it to lock fully shut or at a few inches for air.

A window is only as strong as the latch on it, and most latches are an afterthought.
0tools
to fit
10sec
to lock
2modes
shut or vented
4.7/5
owner rating
Shut, or open for air

You choose where the window stops.

Set it against a closed panel to lock the window completely, or position it to allow a fixed gap so the room can breathe without leaving the window free to slide.

Either way the panel is held down in the track, so the common lift-it-out-of-the-frame trick simply does not work.

Sliding windowsAluminum tracksVented or shutNo drilling
Tool-free

On the track in seconds.

1

Clean the track

Wipe the spot on the track where the lock will sit.

2

Position it

Place it where you want the panel to stop, shut or vented.

3

Tighten it

Secure it with the thumb-screw or adhesive base, no tools needed.

4

Test the slide

Try to slide the window and confirm it holds firm.

No drilling, no marks. It fixes to the track and comes off when you want.
Renter-friendly

Add a real lock without a landlord call.

Nothing is drilled into the frame, so it goes on in any rental and comes off clean when you leave. The window keeps working normally once the lock is removed.

Layer your defense

A locked slider, and an alarm on the glass.

The track lock keeps the panel from sliding or lifting out. The TremShield Alarm sticks to the same pane and sounds at 125dB the instant the glass is touched.

See the alarm
A locked slider, and an alarm on the glass.
Good to know

Questions, answered calmly

It fits standard sliding windows that run in a track. The lock clamps onto the track itself rather than the glass or the frame, so there is nothing to drill and nothing to glue.
Yes. Position the lock to allow a fixed gap, and the window vents while staying locked against opening further.
Yes. It holds the panel down in the track, which blocks the common trick of lifting a slider clear of its frame from outside.
No. It fixes on with a thumb-screw or adhesive base, no drilling, and removes cleanly.
Yes. Many people add two per door for extra hold, and place one on every accessible ground-floor slider.
It does grip a patio door track, and it is a good way to hold a slider at a vented gap. For the main overnight lock on a full-size patio door we would point you at the Sliding Glass Door Security Bar instead, because it fills the whole track and takes far more force than a compact clamp.
White TremShield vibration sensor alarm with red indicator light on a white background
Pairs with this

Add the alarm layer.

A lock slows a break-in down. An alarm makes sure it never stays quiet: the TremShield Vibration Alarm senses the first vibration and answers with 125 dB, before a window ever gives. Peel-and-stick install, no Wi-Fi, no monthly fees.

From $29.99 · multi-pack pricing on 2 and 4 packs

See the Alarm

Stay one step ahead

Real home-security tips, first looks at new gear, and the occasional subscriber-only deal. No fear-mongering, no spam.