Door reinforcement lock

Door Reinforcement Lock

4.8 · 7 reviews

Braced shut from the inside, independent of the deadbolt.

$24.99One-time · free tracked shipping
Free tracked shipping Free 30-day returns 1-year warranty
  • A second lock on the frameMounts beside your deadbolt and holds the door on its own.
  • Holds when the lock is pickedBraces the door from inside, so a pick or a bump key at the lock does not open it.
  • Installs in about 5 minutesScrews included, all you need is a drill.
  • One flip locks you inNo app, no battery, no monthly fee.
Door Reinforcement Lock $24.99

The real weak point

A lock is only as strong as the wood around it.

Your deadbolt isn't the weak point, the frame is. On most doors the strike plate is held by two half-inch screws biting into a thin pine jamb, so a hard shove splits the wood instead of beating the lock.

The TremShield Door Reinforcement Lock adds a second hold on that frame. Flip it down and it braces the door shut on its own, independent of the deadbolt. For the frame itself, add the Door Strike Plate Kit.

A warning, then a wall. That's a system, not a gadget.
5min
to fit with the included screws
1flip
to brace the door
5min
to install
0apps
purely mechanical
How the TremShield Door Reinforcement Lock installs in 5 minutes
For 2am, not 2pm

Flip it down for the hours that matter.

You don't need it in the afternoon. You need it when you're asleep and the deadbolt is the only thing between your bedroom and the street. Flip the brace down before bed, and a picked lock, a bump key or a card slipped at the latch will not open the door from outside.

In the morning, flip it up and leave like normal.

Holds against a bump keyHolds against a picked lockHolds against a latch card
Up in about 5 minutes

No tools but a drill. No app. No subscription.

1

Find the spot

Hold it across the door and the frame, beside your existing lock.

2

Mark it

Mark the screw holes through the plate with a pencil.

3

Drill

Pilot the holes with a 1/8" bit, the most common drill size.

4

Screw in

Drive the included screws. Flip it down and you're locked in.

Holds the door on its own, independent of the deadbolt
If you rent, this was built for you

Security a lease usually rules out, without the lease ever knowing.

No landlord call, no contract, no holes you can't fix. It mounts with the included screws in about five minutes, and the small marks patch over with a dab of filler when you move out. Your deposit stays yours.

The complete picture

It finishes what the alarm starts.

The TremShield Alarm warns you the second someone tests a window or door. This is the hold behind the warning: flip it down and the door is braced shut from the inside. Six alarms for $99, $16.50 each.

See the alarm
White TremShield vibration sensor alarm
Good to know

Questions, answered calmly

It fits standard in-swinging doors, the most common type in homes and apartments. It mounts beside your existing lock on the frame side.

Just a drill with a 1/8" bit. The screws are included, and most installs take about five minutes.

Only small screw holes that patch over with a dab of filler. No contracts, no landlord call, and it comes with you when you move.

It adds a second, independent hold on the frame of an in-swinging door. For the strongest frame, pair it with the Door Strike Plate Kit, whose six 3-inch screws reach the wall stud.

No. It is purely mechanical. Nothing to charge, nothing to connect, no monthly bill. It just works when you flip it down.

Stay one step ahead

Real home-security tips, first looks at new gear, and the occasional subscriber-only deal. Unsubscribe anytime.